2-stroke Medium Motors, 30-90 HP » Yachts & Boats

Mercury 50 Boat Engine
Three-cylinder two-stroke engines with in-line cylinders location, electric starting, system of automatic fuel mixture preparation, remote control and exhaust through the propeller hub. Modular CD electric ignition system provides sure starting and fuel economy, saving simplicity of service, high reliability and improved operating specifications of Mercury 50 boat engine at the same time. System of fuel mixture automatic preparation allows a motor owner to give up procedure of fuel and oil mixing manually. Cooling system is supplied with thermostat and pressure regulator, allowing to support an optimum temperature condition. Mercury engines are supplied with heat alarm and low-level of oil in a feed tank. Engines are supplied with standard (381 mm) and long (508 mm) dead-wood. Suspension bracket has a remotely changeable tilt engine angle (pneumatic or electro-hydraulic). All Mercury engines are supplied with alternators of 260 watt with voltage regulators. All Mercury engines in standard kitting-up have remote control drive and emergency stop cable. Propeller screw is acquired separately.

Mercury 50 Specifications
Power at the Propeller	50/37.3 HP/kilowatt
Top Promptness	5000-6000
Cubic Capacity	967 cm³
Piston Diameter	76 mm
Piston Stroke	71 mm
Reduction Gear Transmission Ratio	1.83:1
Reverse	Present
Alternator	260 watt
Trim Method	Remote
Fuel Capacity	25 L, outer
Deadwood Length	381 and 508 mm (short and long “leg”)
Weight	93 kg

Previous 1 2 3 4 Next